The REDARC Single Voltage 2-1/16" (52mm) Monitoring Gauge enables LED/LCD display charge performance monitoring of either the main or auxiliary battery of 4WDs, campers, and other like vehicles.
Single Voltage 52MM Gauge
The REDARC 52mm single voltage gauge is ideal for monitoring battery systems mounted in 4WD's, Campers, Caravans, Motorhomes and other similar vehicle applications. The LCD/ LED display allows you to monitor the charging performance of either your main or auxiliary battery.
In the event of an alternator or system failure, the voltage reading on the gauge will be low and drop as the battery discharges. In the event of an overcharge condition, the voltage reading will climb above its normal zone. The G52-VA gauge also has pre-set alert levels (<9V and >16V) to notify you of these situations by changing the gauge backlight colour to either amber or red, and initiate an audible beep when the vehicles ignition is on.
Current Sensor*
The G52-VA gauge is also equipped with an optional 100A rated current display that monitors the amount of current to or from your main or auxiliary battery. This device can be fitted around the earth connection of the main or auxiliary battery. You will need to purchase the REDARC Hall effect current sensor (GS-AMPS) to equip the gauge with this function.
When extra protection is required, the G52-VA is the perfect accessory for a REDARC dual battery isolator (SBI12) or in-vehicle battery charger (BCDC range) where a 12 volt battery is installed. It’s a visual monitor of product performance and battery health.
The G52-VA gauge diameter requires a 52mm hole for mounting. REDARC offer a range of mounting solutions including a 2” black plastic mounting cup (GH-CUP) and one (GH-MP1), two (GH-MP2) and three (GH-MP3) hole gauge mounting panels. Radio inserts are also available for the Toyota Hilux (GH-RI05).
Features
- Satin Chrome Bezel
- 13 Selectable Backlight Colours
- Multiple alert levels with amber or red backlight and audible beep - Alerts when Voltage drops below 9V or climbs above 16V.
- Display illuminates when park lights are turned on so you can check battery voltages and discharge or charge current without turning on the ignition.
- If fitting more than one REDARC gauge, a communications link can be connected between the gauges to change the backlight colour of all at once.
Enhanced Lighting Controller*
The GA-ELC is designed to enhance the lighting of your REDARC gauges as only one required for a set. It is to be used when you do not have a dimming circuit to connect your gauge to or the dimming circuit in your vehicle does not dim the REDARC gauge to your liking.
The GA-ELC also allows you to program night time brightness and colour of your REDARC gauges, including dimming if connected to a dash dimmer. Once programmed your gauges will change colour when turning on your park lights and back to a day light colour when you turn them off. The GA-ELC is also 24 volt capable.
Specifications
| gtin_barcode | 9338628003549 |
|---|---|
| brand | REDARC |
| Viewing Angle | ±45° horizontal - ±60° / -15° vertical |
| Alert Levels | <9V / >16V |
| Standby Current | 30mA |
| Weight | 50 g |
| width | 52 mm (diameter) |
| depth | length | 62 mm |
| Warranty | 2 Years |
| Input Voltage | 6 - 16V |
If you're unable to find the information you seek, please don't hesitate to reach out to us. We're here to help!
DELIVERY TIMES
All the following estimates are in business days. If you haven’t received your order within 10 days then please contact us via email at support@trailersolutions.au with your order number in the message.
| Standard | Express | Bulky Items | |
|---|---|---|---|
| VIC - Metro | 3 - 5 | 2 - 3 | 3 - 5 |
| VIC - Regional | 6 - 8 | 3 - 5 | 8 -10 |
| ACT - Metro | 3 - 5 | 2 - 3 | 3 - 5 |
| ACT - Regional | 6 - 8 | 3 - 5 | 8 -10 |
| NSW - Metro | 4 - 6 | 3 - 4 | 4 - 6 |
| NSW - Regional | 7 - 9 | 4 - 6 | 9 - 11 |
| SA - Metro | 5 - 7 | 4 - 5 | 5 - 7 |
| SA - Regional | 8 - 10 | 5 - 7 | 10 - 12 |
| WA - Metro | 7 - 9 | 5 - 7 | 8 - 10 |
| WA - Regional | 10 - 12 | 7 - 9 | 12 - 14 |
| QLD - Metro | 6 - 8 | 4 - 6 | 7 - 9 |
| QLD - Regional | 9 - 11 | 6 - 8 | 11 - 13 |
| NT - Metro | 7 - 9 | 5 - 7 | 8 - 10 |
| NT - Regional | 10 - 12 | 7 - 9 | 12 - 14 |
| TAS - Metro | 6 - 8 | 4 - 6 | 7 - 9 |
| TAS - Regional | 9 - 11 | 6 - 8 | 11 - 13 |
DELIVERY ACCEPTANCE
All deliveries are registered and require a signature upon delivery. If there's no one at home, a card will be left with instructions to collect your order. Non bulky items can be delivered to the PO Box.
BULKY ITEMS: Once the product has reached the nearest depot from the delivery address, the delivery company will contact you via the contact number you have provided at checkout to arrange a suitable time for delivery. If no one is home at the time of delivery, a second attempt will be made to deliver the item free of charge before you need to pick up the item yourself from the depot (a card will be left with the details of the depot).
SPLIT CONSIGNMENT / DELIVERIES
On occasions, an order may contain multiple items which may need to be delivered by multiple courier companies. Hence the products may arrive at different times.
SHIPPING DELAYS
There could be delays in delivery from time to time due to the following reasons:
- Public holidays
- Incorrect shipping address
- Extreme weather conditions
- Pandemic like situations where the supply chain is affected due to staff shortages at courier companies
- If the payment capture process is unsuccessful your order will be delayed until alternate payment arrangements can be made
- Occasionally if a particular product is in high demand we may need to re-order the product from our suppliers.