ELECTRIC STEEL CABLE WINCH
- 1 X 3000LBS WINCH
- 1 X CLEVIS HOOK
- 1 X CONTROL BOX (WITH CABLES)
- 1 X SAFETY ROPE
- 1 X SET OF BOLTS
- 1 X FAIRLEAD ROLLER
*NOTE - Cable colour may vary depending on stock
INSTALLATION:
1. Mount the winch on the vehicle or other object using Screw M8X30, lockwasher, Washer-Flat offered. Other similar screw can be instead.
WARNING: This winch must be mounted with the wire rope in the underwind direction. Improper mounting could damage your winch and void your warranty .
2. Route the two couple of lines from the switch to the motor and battery respectively. Connect the red line to the positive(+) terminal and the green (or black) line to the negative(-) terminal of the 12v battery. Connect the rest two lines to the terminal on the motor of the electric winch.
3. Check the direction of the drum turning. Pull and turn the clutch knob of the "off" position(drum can be turning free). Pull out the cable from the drum then engaged the clutch by turning the knob to the "IN" position. Push the "cable in" button on the handheld, if the cable is re-spooling then it is right way for connected. Otherwise please change he line connected the motor. And repeat the above mentioned operation.
MAINTENANCE:
1. Periodically check tightness of mounting bolts and electrical connections. Remove all the dirt or corrosion that may have accumulated on the electrical connections.
2. Do not attempt to disassembly the gearbox. Disassembly will void warranty. Repairs should be done manufacturer or authorised repaire centre.
3. The gearbox having been lubricated using high temperature lithium grease at the factory. No internal lubrication is required.
REPLACE THE WIRE ROPE:
1. Engaged the clutch by turning the clutch knob to the "IN" position.
2. When inserting the wire rope into the drum, insert it into the correct end of the hole provided. Tighten the set screw securely.
3. Operate the winch and re-spool the wire rope around the drum.
PERFORMANCE SPECIFICATION:
| Single Line Rated Pull | 3000LBS |
|---|---|
| Gear Reduction Ratio | 153:1 |
| Motor | Permanent magnet DC 12V motor with 1 hp output |
| Overall dimensions | 300(L)X105(W)X105(H)mm |
| Drum Size | 31.5(D)X73(L)mm |
| Cable Length | 9M X 5.5MM |
| Weight | 6.5kg |
LINE SPEED AND MOTOR CURRENT(first layer)
| LINE | LBS | 0 | 1000 | 2000 | 3000 |
| KGS | 0 | 454 | 906 | 1361 | |
| LINE SPEED | FPM | 10.5 | 7.5 | 4.2 | 2.3 |
| MPM | 3.2 | 2.3 | 1.3 | 0.7 | |
| MOTOR CURRENT | AMPS | 10 | 40 | 90 | 145 |
LINE PULL AND CABLE CAPACITY
| LAYER OF CABLE | 1 | 2 | 3 | 4 | 5 | |
| RATED LINE PULL PER LAYER | LBS | 3000 | 2250 | 1890 | 1590 | 1370 |
| KGS | 1361 | 1022 | 859 | 722 | 622 | |
|
CABLE CAPACITY PER LAYER |
FT. | 4.9 | 11.5 | 19.3 | 28.5 | 30.1 |
| M | 1.5 | 3.5 | 5.9 | 8.7 | 9.2 | |
If you're unable to find the information you seek, please don't hesitate to reach out to us. We're here to help!
DELIVERY TIMES
All the following estimates are in business days. If you haven’t received your order within 10 days then please contact us via email at support@trailersolutions.au with your order number in the message.
| Standard | Express | Bulky Items | |
|---|---|---|---|
| VIC - Metro | 3 - 5 | 2 - 3 | 3 - 5 |
| VIC - Regional | 6 - 8 | 3 - 5 | 8 -10 |
| ACT - Metro | 3 - 5 | 2 - 3 | 3 - 5 |
| ACT - Regional | 6 - 8 | 3 - 5 | 8 -10 |
| NSW - Metro | 4 - 6 | 3 - 4 | 4 - 6 |
| NSW - Regional | 7 - 9 | 4 - 6 | 9 - 11 |
| SA - Metro | 5 - 7 | 4 - 5 | 5 - 7 |
| SA - Regional | 8 - 10 | 5 - 7 | 10 - 12 |
| WA - Metro | 7 - 9 | 5 - 7 | 8 - 10 |
| WA - Regional | 10 - 12 | 7 - 9 | 12 - 14 |
| QLD - Metro | 6 - 8 | 4 - 6 | 7 - 9 |
| QLD - Regional | 9 - 11 | 6 - 8 | 11 - 13 |
| NT - Metro | 7 - 9 | 5 - 7 | 8 - 10 |
| NT - Regional | 10 - 12 | 7 - 9 | 12 - 14 |
| TAS - Metro | 6 - 8 | 4 - 6 | 7 - 9 |
| TAS - Regional | 9 - 11 | 6 - 8 | 11 - 13 |
DELIVERY ACCEPTANCE
All deliveries are registered and require a signature upon delivery. If there's no one at home, a card will be left with instructions to collect your order. Non bulky items can be delivered to the PO Box.
BULKY ITEMS: Once the product has reached the nearest depot from the delivery address, the delivery company will contact you via the contact number you have provided at checkout to arrange a suitable time for delivery. If no one is home at the time of delivery, a second attempt will be made to deliver the item free of charge before you need to pick up the item yourself from the depot (a card will be left with the details of the depot).
SPLIT CONSIGNMENT / DELIVERIES
On occasions, an order may contain multiple items which may need to be delivered by multiple courier companies. Hence the products may arrive at different times.
SHIPPING DELAYS
There could be delays in delivery from time to time due to the following reasons:
- Public holidays
- Incorrect shipping address
- Extreme weather conditions
- Pandemic like situations where the supply chain is affected due to staff shortages at courier companies
- If the payment capture process is unsuccessful your order will be delayed until alternate payment arrangements can be made
- Occasionally if a particular product is in high demand we may need to re-order the product from our suppliers.